top of page
PC-3000 SSD Banner.png
20-years.png

For SSD Recovery and  Repair

UDMA | Express | Portable

OVERVIEW

The PC-3000 SSD Software System operates in tandem with one of the three up-to-date hardware platforms – PC-3000 Portable III, PC-3000 Express, or PC-3000 UDMA – and it is intended for SSD repair and diagnosis and for data recovery from SSDs with SATA, PATA, mSATA, M.2, PCIe (NVMe/AHCI), PCIe x16, Apple Macbook interfaces and the capacity from 32 GB to 2 TB produced by different manufacturers, such as OCZ, Corsair, Crucial, RunCore, A-DATA, G.Skill, Micron, Plextor, Intel, Samsung, Seagate, SanDisk, Kingston, and others.

PC-3000 SSD Banner.png

PC-3000 SSD

The PC-3000 SSD contains a set of specialized utilities for working with solid-state drives. This set includes the Universal Utility for diagnosing any SSD based on the ATA-8 specification (both currently existing models and those that will be manufactured in future) and the Active Utilities (Special Utilities) intended for working with a particular drive model in factory mode. It enables to deeply diagnose SSDs, to perform service operations, to re-write the drive's microcode, to get direct access to memory chips, to carry out low-level formatting blocking the damaged cells and placing their addresses into the defect table, and to perform many other useful operations.

UPDATES

The list of Active Utilities of the PC-3000 SSD System is expanded as soon as new SSD models are studied, and it is a continuous process. Those utilities that are currently available allow you to successfully recover data from all contemporary solid-state drives and to resolve the majority of wide-spread SSD problems. Special adapters and connectors for the PC-3000 Portable / Express / UDMA have been added in order to use technological interfaces to diagnose and repair drives.

PC-3000 SSD

The PC-3000 SSD Extended software add-on is the world’s first and only solution to deal with damaged SSDs based on the PCIe interfaces along with the SATA ones! Together with the special adapters and the PC-3000 Portable III Systems, it helps you to diagnose the condition of the drives and extract evidence from healthy and damaged PCIe SSDs:

The functions of the PC-3000 SSD software:

for data recovery:

  • verify and restore the SSD's service information

  • read and write the content of the SSD's ROM

  • load the microcode into the drive's RAM

  • emulate the translator operation in order to get access to user data

  • view the password and reset the password that was earlier set on an SSD (bypass the ATA security)

  • turn off background processes in an SSD to prevent data damage

  • provide direct access to the content of memory chips (it makes unsoldering unnecessary)

  • work with the Data Extractor

Adapter

  • M.2 PCIe NVMe/AHCI SSD & M.2 SATA SSD adapter (included in the delivery kit)

  • PCIe NVMe/AHCI Adapter for Apple Macbook SSD (can be purchased separately)

  • PCIe x16 SSD adapter

  • (can be purchased separately)

PC PATA-SATA adapter for SSDs based on PHISON PS3109 and PS3111 controllers
SATA-M.2 adapter for SSD

For SSD repair (to recover normal operation):

search for the damaged memory chips

diagnose an SSD in factory (technological) mode

reset the logs and S.M.A.R.T. parameters

  • verify and restore the SSD's service information
  • read and write the content of the SSD's ROM
  • load the microcode into the drive's RAM
  • view the logs of hidden defects (P-page, G-page) 0
  • perform low-level formatting to hide the discovered defects
  • change the configuration and identification parameters
Supported devices

  • M.2 PCIe NVMe and M.2 (NGFF)

  • The Apple MacBook SSD M.2 NGFF PCI-e NVMe Macbook SSD 2013-2019 (12+16 pin)

  • Native PCIe x16 - based drives(servers, gaming PCs, etc.)

SATA-mSATA adapter for SSDs
SSD Adapter for PC-3000 Portable
bottom of page